Enbio S Autoclave Sterilizer
Enbio S is six times smaller and three times lighter than a typical vacuum autoclave. With a width of 9.8 inches, a height of 6.3 inches and a depth of 22 inches, Enbio S features a convenient, compact design that’s a great fit for any practice–regardless of space.
FAST STERILIZATION SPEED
The Enbio S features an efficient operation that allows you to sterilize a load of wrapped instruments in just 15 minutes and unwrapped instruments in a FAST cycle in just seven minutes. Instruments come out fully dry and ready to use. Unbelievably short process times will save your procedure in an emergency, or allow sterilization of the instruments as you go, between patients.
It runs through four full cycles of drying per hour. And has the ability to sterilize 32 wrapped instruments and 50 unwrapped instruments per hour.
It emits noise at the level of only 32dB, which is barely audible to the human ear. This makes it possible to use the autoclave even in an operatory without disturbing your patients.
EASY AND COST-EFFECTIVE
Only distilled water is necessary to operate the device, making it extremely low-maintenance and reducing running costs. The HEPA filter is also long-lasting and only needs to be replaced once every 1000 device cycles. Also there’s no programming or logging in necessary. Just switch it on, choose your mode and begin sterilizing.
EASY TOUCH INTERFACE
The touch interface makes it easy to operate the device by selecting the operating mode and sterilization parameters. The display provides information on the number of cycles, as well as the status of the USB drive memory and HEPA filter.
Enbio S Autoclave Data Sheet
If you’re interested in learning more about the Enbio Autoclave, please don’t hesitate to contact us today! We’d be more than happy to answer any of your questions.
Call your local Hayes Office to find out more
Or send us a message online through the form below
Local, convenient service from the handpiece experts. With over 80 locations to serve you, Hayes is your best solution for hassle-free handpiece repair. We’ll come to your office to get you back up and running, and we’ll train your staff to properly maintain your equipment. We’re at your service.